10A 16A 20A 25A 32A 40A 50A 63A 80A 100A Rotary Isolating Switch Rear mounted

 
10A 16A 20A 25A 32A 40A 50A 63A 80A 100A Rotary Isolating Switch Rear mounted
 
 
KRIPAL HAS THE DESIGN PATENT FOR THIS SERIES SWITCHES. 

 
Description: 
 

Disconnect Switches from KRIPAL are hand-operated switchgear for main circuits with 90° switching angle and are offered as ON-OFF Switches (2, 3, 4, 6 and 8 pole) or as Changeover Switches with centre OFF (2, 3 and 4 pole).
 

Specifications:

Applications:
 

The switches must be selected according to the following performance specifications:

1) According to motor switching capacity, when the switch is fitted in such a way that the operator may use it for operational ON and OFF switching.

2) The rating data always applies to 3 poles. When the motor rating is divided between 6 poles, such as for star-delta switching, a 6 pole switch can be used to control 1.73 times

the rated power.

3) If the switch has a load-shedding Contact (LA), you can select the appropriate switch according to the uninterrupted current. The load-shedding contact is an auxiliary contact, which s closed in the ON position and opens early when witching off, so that a contactor located in the circuit takes over the switching duty and the maintenance/safety switch

operates at zero load. When switching on, the load-shedding contact closes later than or at the same time as the main contacts. With UKP and UKT switches this is the N/O auxiliary contact.

4)The "ON" position can be locked with a padlock (by altering the handle).

This is not permissible for switches with a red/yellow handle.

Features:

• Safety switches are always housed in insulated enclosures and have an inscription saying "Safety Switch" on a bright orange label.

• Switches to be used for emergency stop switching have a red handle and yellow locking collar in accordance with STOP category O (as per IEC/EN 60204/VDE 0113).

• If the switch is not approved for emergency stop switching, both parts will be black ("SW" part no. suffix).

• The cover and handle are interlocked by fitting a padlock.

Installation:

A. front mounting: four pole mounting; single hole mounting;

B. Base mounting: Snap-on mounting (DIN rail 35mm)

C. Enclosed Switches: PC enclosure; stainless steel enclosure

 
Optional:
 
a. Netural contacts
 
b. 1NO+1NC module
 
c. Color of handle and surroundings